Sp200s Programmer Software

S200x Programmer Software Update
Sp200s Programmer Software
Sp200s Programmer Software Download

The Best Way of Using Enhanced SP200S Device Programmer

I noticed SP200S device programmer from our website: vipprogrammer.com and was astonished at the powful functions but low price. Based on SP180S Chip Burner, SP200S is dedicated to improve the design. Enhanced SP200S Programmer is 24/93 series EEPROM memory chip burner, and it can program a variety of models just like MCUs and Serial EEPROM. After viewing the device programmer tools, i am going to write an article to conclde the usage of this device programmer. Hope it useful

SP200S PROGRAMMER DRIVER (sp200sprogrammer1395.zip) Download Now. SP200S PROGRAMMER DRIVER. FT-60 Programmer is a software for programming memories and settings of the radio For Windows XP, Vista 32 or 64 bit and Windows 7 32 and 64 bit. And The SP200S/SE, USB To RS232 Serial DB9 Female/Male Cable. It simply consists of passive components.

SP200S Enhanced Version USB Chip Programmer is designed to improve the popular SP180S programmer based on a programmer directly using the USB interface communication and power supply, compact, sophisticated software and hardware design, improved functionality, is currently the only professional programming control free software programmer. Can support ATMEL / WINBOND / SST.
More videos Kinds Single Chip Microcomputer, 24/93 series EEPROM Memory Chip Pr.

On one side, you must know it is convinent to use Overall it’s simple to use SP200S device programmer with the WLPro programmer software. But you must master some tricks, learning the way of using this device programmer efficiently. Unfortunately WLPro software is available only for Window based systems. Let’s do a step by step run through of using SP200SE Device Programmer on Windows based PC.

Functions of Enhanced SP200S

Easy to Use
USB Interface to PC
ZIF Socket
Small size
Low Cost
Easy to use and Intuitive Software GUI
Supports 8051/52/MegaAVR/TinyAVR/ EEPROM
Step One: Install USB-TTL Chip Drivers on your Computer

Enhanced SP200SE has this chip called CH340T to have USB interface. CH340T converts USB data into TTL serial data stream. One must install CH340T drivers to use SP200SE.

Install these drivers and make sure after installing the driver you have a COM Port listed on your device manager. May be something like COM13, COM2 etc. If it is not listed in device manager try restarting your operating system.

If your COM Port number is in 2 digits i.e. 10, 12, 13….your SP200SE will not work as it needs a single digit name of com port number. So its time to change your com port number to single digit.

Step Two: Convert COM PORT number to Single Digit, If not already in single digit.

S200x Programmer Software Update

Go to Device Manager-> Ports [COM & LPT]
Change Port number to Single Digit in Advanced Settings

Once port number is in single digit, you are all set to use SP200SE to program your MCU/ EEPROM.

Step Three: Install WLPro Programmer Software
Download and Install WLPro, Once it is installed check if the WLPro software detects the SP200SE Hardware.

Choose SP200S Enhanced Programmer, Green DOT must be ON to use device Programmer

Step Four: Choose Device and Program/ Verify/ Read/ Protect etc.

SP200SE is super easy to use and very useful tool at a very low cost. A Must have for all serious hobbyists and embedded system designers.